I. Correct Usage Instructions
1. Pre-Use Treatment
New glass bottles should be cleaned before first use. It is recommended to soak them in warm water with a small amount of baking soda, clean the inner and outer walls with a soft brush, and finally rinse thoroughly with clean water and allow to air dry completely.
2. Filling Precautions
Ensure the inside of the bottle is completely dry before filling. When filling, avoid getting wine on the outer wall of the bottle neck, and leave approximately 1-2 cm of space at the top of the bottle to create a necessary air chamber.
3. Sealing Operation
Use sealing accessories that match the bottle neck. If using natural cork, soak it in water or the appropriate wine beforehand to allow it to expand moderately; if using screw caps, tighten to the appropriate tightness, avoiding excessive force that could damage the bottle neck.
4. Storage Environment
Store the bottles in a cool, dark environment with stable temperature and humidity. It is recommended to maintain an ambient temperature of 15-20℃ and a relative humidity of approximately 60-70%, and avoid drastic temperature changes. 5. Daily Use Guidelines
When using wine, it is recommended to use a dedicated wine strainer or funnel. Reseal immediately after use to minimize the wine's contact time with air.
II. Cleaning and Maintenance Guidelines
1. Routine Cleaning
Rinse with warm water promptly after use. For stubborn stains, use a small amount of neutral detergent with a soft cloth to clean. Avoid using hard cleaning tools to prevent scratching the glass surface.
2. Deep Cleaning
For bottles used long-term, periodically soak them in a diluted white vinegar or baking soda solution to effectively remove internal sediment and residual odors.
3. Disinfection Treatment
For strict disinfection, boil in water for 5-10 minutes or soak in a disinfectant that meets food hygiene standards. Rinse thoroughly with clean water afterwards.
4. Drying and Storage
After cleaning, place the bottle upside down in a ventilated area to dry completely, ensuring no moisture remains before storing to prevent mold growth.
5. Regular Inspection
For bottles used for long-term storage, it is recommended to regularly check their seals and the condition of the liquid inside. Any abnormalities should be addressed promptly.
III. Common Problem Handling
1. White Sedimentation Inside the Bottle
This is often due to mineral crystallization or tartrate precipitation. It can be cleaned by soaking the bottle in warm water with a small amount of vinegar; this will not affect the safe use of the bottle.
2. Checking the Seal
Fill the empty bottle with water and invert it to observe for leaks; or gently press the cork to check its springback.
3. Number of Reusable Bottles
As long as the bottle is undamaged or cracked and maintains a good seal, it can be reused, provided it is kept clean.
4. Bottle Requirements for Different Types of Alcohol
For high-alcohol beverages, it is recommended to use bottles with thicker walls; for beverages with high sugar content, extra attention should be paid to timely and thorough cleaning after each use.
5. Safe Handling Recommendations
When handling, support the lower middle part of the bottle with both hands, avoiding gripping only the neck. For large-capacity, heavy wine bottles, it is recommended to move them in stages to ensure safety.
IV. Other Usage Suggestions
1. Decorative Use: Clean, dry empty wine bottles can be used for flower arranging, making candlesticks, or as decorative items.
2. Travel Cartridges: Small-capacity wine bottles can be used to cartridge wine for easy carrying when traveling.
3. Condiment Storage: Thoroughly cleaned and sterilized wine bottles can be used to store homemade vinegar, spice oils, and other condiments.
4. Crafts: Wine bottles can be creatively transformed into vases, lamps, and other practical items through DIY projects.
5. Collection and Display: Uniquely shaped wine bottles can be displayed as collectibles.
Following these guidelines will ensure the safe and proper use and maintenance of glass wine bottles, thus better preserving alcoholic beverages and extending their lifespan. In practical applications, always prioritize safety and practicality.

